ALL MOBILE FLASH TOOL

Mobile Flashing Tools , Driver And Flashing Box Software Update Download

Medusa Box v.2.3.9 version v 2.3.9 setup download mediafire

Medusa Box v.2.3.9 is out!

We have added boot repair via USB and small TP for a wide range of LG phones which are detected by PC as “Qualcomm HS-USB QDloader 9008” device!

Also added repair via JTAG interface for:
HTC Desire 300 (0P6A100)
ANDROID DOWNLOAD
Medusa Box v.2.3.9 Release Notes:
– Added support for the following models:
LG D321 (based on MSM8610) – added Dead Boot Repair via USB
LG D325 (based on MSM8610) – added Dead Boot/Phone Repair via USB ANDROID DOWNLOAD
LG D325 (based on MSM8210) – added Dead Boot/Phone Repair via USB (in test mode)
LG D325F8 (based on MSM8610) – added Dead Boot Repair via USB
LG D325G8 (based on MSM8610) – added Dead Boot Repair via USB
LG P700 – added Dead Boot Repair via USB
LG P705 – added Dead Boot Repair via USB
LG P705F – added Dead Boot Repair via USB
LG P705GO – added Dead Boot Repair via USB
LG P708G – added Dead Boot Repair via USB
LG P710 – added Dead Boot Repair via USB
LG P712 – added Dead Boot Repair via USB
LG P713 – added Dead Boot Repair via USB
LG P713GO – added Dead Boot Repair via USB
LG P713TR – added Dead Boot Repair via USB
LG P714 – added Dead Boot Repair via USB
LG P715 – added Dead Boot Repair via USB
LG P716 – added Dead Boot Repair via USB
HTC Desire 300 (0P6A100) – added Dead Boot Repair, Repair CID, Repair IMEI (thanks to Mr. Dr_Wolodya)

– All pinouts and Repair procedures are described in the manual (“Help” button in Software).

Medusa – Ultimate Breakthrough in the Phone Repair!

To repair mentioned above devices via USB, do next steps::
Attach testpoint as shown on Figure 1 in Software manual, and connect phone with Micro USB cable directly to mainboard USB port (don´t use USB hubs!).
Check PC Device Manager, a new device should appear “Qualcomm HS-USB QDLoader 9008” or “Unknown Device” if you had´nt installed a driver. Drivers are in {Installation_Folder}DriverQHSUSB. ANDROID DOWNLOAD
Release testpoint and press EasyRepair button in software (or Connect button, when in Advanced Mode).

Leave a Reply

Your email address will not be published.

ALL MOBILE FLASH TOOL © 2016